How to make a ceiling chandelier from wires. How to make a chandelier with your own hands - tips on choosing a lamp, decor, a master class and photo ideas. Do-it-yourself chandelier shades: a variety of ideas and materials

Ceiling chandeliers - lighting devices that perform two functions at the same time. Firstly, they are used to organize the main lighting in the room. Secondly, devices are one of the main elements of the decorative decoration of the room.

Numerous manufacturers offer equipment of different designs, but it is far from always possible to find something really worthwhile that fits into the overall interior of the room. In other situations, the cost of the chandelier you like may be too high. That is why many people are interested in how to make a ceiling lamp with their own hands.

Handmade products will be unique and original, thanks to them you will be able to express your taste and character. It is not so easy to make such devices on your own. The work requires a certain imagination and perseverance. On the other hand, a ceiling chandelier can be created from improvised means and items that have become garbage for you.

Choose any materials for manufacturing - wood, plastic, metal or glass. Chandeliers made of wine bottles, wooden skewers or straw look very original. To summarize: the choice of material for a homemade lamp completely depends on the imagination and idea that arose in the head of the owner of the apartment.

Varieties of lighting fixtures

The final stage of any repair and construction work will be the purchase of lighting fixtures. Often the main one is the ceiling chandelier, which is installed in the center of the room, provided it has the correct geometry. There is a wide range of luminaires on the market that differ in design, shape, principle of operation, and even the presence / absence of certain structural elements.

Today, all people strive to save money, so it will be important to use a chandelier for energy-saving or LED lamps. It is advisable to choose products with partially or completely closed shades, in which lamps are hidden. Due to this, you will protect the ceiling structure and be able to protect yourself in the event of a light bulb explosion (the fragments will remain inside the ceiling).

If you still like a chandelier with an open arrangement of light bulbs, then inspect it and make sure that after installation the luminous flux will be directed downwards. There is also a simple rule - the simpler the product, the easier the subsequent installation.

Another point to consider when choosing a chandelier is the purpose of the room and its dimensions. In spacious rooms with high ceilings, volumetric pendant-type lamps should be installed. For small spaces, space savings are required, so focus on flat (flattened) options.

Conventionally, chandeliers for the ceiling can be divided into two main varieties:

• classic hanging;
• flat with the closest placement to the ceiling.

And the latter are divided into two subcategories - built-in and overhead. Overhead shades are considered the best solution for bathrooms, corridors and kitchens. The presence of a separating platform ensures their rapid cooling and high fire and electrical safety.

Recessed lights are also called spotlights. They are often installed (more correctly, they are built in) in furniture, suspended ceilings or arched structures. Manufacturers provide a wide variety of shapes, colors and designs for both traditional and flat luminaires.

Finally, in addition to the design features of the fixtures themselves, they distinguish the type of light sources used:

1. A filament lamp is one of the most common and simple options. The cheapest light source. Under mechanical action, it quickly fails due to the vulnerability of the structure, burns out relatively soon (in the case of continuous operation, it can burn out in two to three days).
2. An energy-saving fluorescent lamp is one of the best varieties of housekeepers. Advantages of a product are connected with profitability and long service life. Along with LEDs, it is the most common light source in developed countries.
3. The LED lamp is an expensive product, the popularity of which is increasing every year. The efficiency factor exceeds 90%, and in the case of high-quality devices it reaches 98%. They are characterized by a longer service life and increased reliability.

An example of a homemade lamp

Consider one of the simplest examples of a DIY ceiling lamp.

For the manufacture we need:

• 5 l plastic bottle;
• plastic spoons - their number depends on the dimensions of the bottle, which will become the frame;
• quick-drying adhesive for plastic;
• sharp knife;
• cartridge with wire.

To begin with, a frame is prepared from a plastic bottle. Remove any labels from the item, rinse and dry thoroughly. After that, feel free to cut out the bottom. Cut off all the handles from the plastic spoons, but so that small pieces of 2 cm remain.

Glue the resulting scraps with “scoops” onto the base of the frame from a plastic bottle. To do this, we just need the remaining pieces of handles, which need to be poured abundantly with glue and pressed tightly to the surface (the convex part of the scoop should look out). Tape the container in a circle until the entire surface is hidden. Ideally, the spoons are placed in a checkerboard pattern, followed by a shift for a tight fit and no visible areas.

Cartridges with wiring can be removed from some old chandelier, then installed and fixed in a new product by pulling the bottle through the neck. A decorative bowl can be decorated with the same blanks using glue and placed on the neck.

To make sure that the product is working, at the final stage, screw the light bulb into the lamp and connect it to the power source. If successful, it remains to install the chandelier on the ceiling.

For a more stylish design and change of colors, you can paint plastic spoons. This will increase the originality and attractiveness of the product.

Style selection

In addition to the points listed in the first chapter of the article, when choosing a chandelier, you need to focus on a certain style. This is also true for those cases when you decide to make the product yourself. Comfort, coziness and how pleasant it will be to be in it depend on the interior created in the room.

The ceiling chandelier is the main element of the decor, therefore, with a competent approach, the perception of the environment will improve, with a careless one, it will completely deteriorate. As you know, “breaking is not building”, therefore, in order to spoil the interior, it is enough to choose the wrong style.

Decide in advance on the design of the future lamp. The most common styles for chandeliers are hi-tech, modern and provence.

High tech

It includes products made of glass and metal. Modern appliances fit perfectly into the design of the bedroom and living room. Externally, the chandelier may look chaotic (with an arbitrary arrangement of decor elements). A great option for people who want to modernize an apartment or a private house, but do not want to make something too complicated. Any errors made in the manufacture of the chandelier may look like an original design decision.

Modern

In accordance with this style, appliances are made of glass and wood. The ceiling lamp is characterized by perfectly even and clear lines, has the correct geometry.

Provence

The most complex execution, which is suitable for people who understand the principles of hand-made. Various fabrics, colorful ribbons, beads, embroideries can be used to decorate the chandelier. The lamps are gentle, suitable for creating a romantic atmosphere. Provence style lighting fixture is suitable for decorating any living space.

Mounting materials

For ceiling mounting of the lamp, certain materials and tools will be required:

• the lamp itself;
• junction box;
• screwdriver (curly);
• switches;
• as an alternative - dimmers (a rotary toggle switch that adjusts brightness, turn on / off the light bulb);
• wires;
• electrical tape;
• indicator (tester);
• pliers;
• connecting blocks.

Ideally, electrical wiring should be routed using connector blocks. If such products are not available, then twist the bare ends of the wires with pliers and hide under a dense layer of electrical tape. The compounds can also be placed under polymer caps. Make sure the wires wrap tightly around each other.

When laying the cable, pay attention to the material from which it is made. It is advisable to twist aluminum with aluminum or copper with copper. When wires from two different materials come into contact, gradual oxidation will occur, leading to burnout and loss of contact.

Work sequence

Before installing the ceiling light, determine the phases of the wires. To do this, you need an indicator screwdriver or a special probe. If you attach the working surface to the phase core, the light bulb will start to glow. Otherwise, the wire belongs to the zero phase.

Next, you need to determine the phases on the wiring of the lighting fixture. Plug two wires into the outlet, but in no case touch the third one. If there are several bulbs on the chandelier, then about half of them will light up. Leave any wire in the outlet and replace the second with a third. The second half of the bulbs should light up. Thus, the wire that is constantly in the outlet (and when connected in turn with the other two turns on the light bulbs) is the zero phase.

Attach the lamp to the ceiling. For this, both a classic hook sticking out of the ceiling and a mounting rail (included with most modern devices) are used. If there is a hook from the old chandelier, it is advisable to dismantle it.

Connecting fixtures

If it is necessary to connect a floor lamp or chandelier with a two-wire cable, difficulties should not arise at all. Simply connect the ends of this cable to the two ends of the wiring. If the lamp consists of several parts and there are more wires, then it is correct to twist them in pairs, subsequently connecting them to the necessary residential electrical wiring in the apartment.

A three-core cable indicates the presence of two normal and one zero phases. Follow the scheme described above to find the zero phase. After that, connect the device to the house wiring.

Traditionally, the zero phase on the lamp has wires with blue insulation, the usual one is brown, black or red. If there are several blue wires, then they need to be connected in pairs, and then connected to the zero phase. Do the same with other colored parts.

Products with four cores are much less common. The latter is intended for grounding and is usually painted yellow-green. It should be screwed to the luminaire body with a conventional screw. Be sure to isolate all connections.

For the manufacture of ceiling lamps with your own hands, any materials can be used. The main thing is to choose the style and shape in advance and navigate the installation site. Also, before starting work, it is advisable to draw a sketch of the future product. Everything else is limited by your imagination.

Connecting homemade lighting fixtures is carried out in the same way as purchased ones. Using our instructions, you can easily connect ceiling chandeliers with two, three and even four cores. The main thing is not to forget about safety rules and ensure complete insulation of the wires, excluding a short circuit.

Decorative details in interior design will help to give the room a unique and original design. A do-it-yourself chandelier for the kitchen is an extraordinary detail, made according to your own wishes and preferences. To make this element will not be difficult, but at the same time you will have to work a little.

Chandelier making workshops

To make a chandelier with your own hands, you can use various materials and manufacturing techniques, depending on the person's imagination. There are several traditional and simple options that can be made from improvised means and that will bring new colors and emotions to the interior of the kitchen. Homemade chandeliers are becoming increasingly popular, which is explained by the ability to transform your home without spending almost a dime.

As a rule, such materials can be found in the house:

• threads;
• paper;
• plastic utensils;
• newspapers;
• disks;
• plastic bottles, etc.

Thread chandelier

This is a fairly simple and affordable way, the materials for the implementation of which are available in every home.

You will need:

• balloon;
• cotton threads (the color is chosen according to the style of the interior);
• PVA glue.

Manufacturing technique:

1. At the first stage, you need to inflate a regular balloon.

3. The ball is wrapped with threads so that there are no gaps. The work requires a certain amount of time, so you should be patient, as the end result will undoubtedly please.

4. The product must be left to dry completely for at least 1 day. To check the strength of the structure and make sure that the future chandelier does not lose its shape, the ball in it must be lowered and then re-inflated.

5. When the design has dried and the threads have become hard, the ball bursts and is carefully removed.

6. A hole is cut out under the light bulb, into which the cartridge with the wire is lowered.

The process of making a ceiling lamp from threads

A do-it-yourself chandelier for the kitchen is decorated with additional decorative elements. It can be butterflies, flowers, scraps of fabric and more.

Plastic bottle lamp

There are two ways to make a chandelier from plastic bottles. Let's start with a non-standard option.

To complete the work you will need:

• plastic bottle 5 l;
• disposable spoons;
• glue;
• cartridge with wire.

Necessary materials

Manufacturing process:

1. First cut off the bottom of the bottle.

2. In spoons, we separate the handles from the scoops, which we will need to make the structure.

3. After preparing the adhesive mass, apply it to the scoops, which are attached to the edges of the plastic container. In this case, we attach the upper scoop with an overlap, it should be in the middle of the two lower ones, with the convex side out. Sticking should start from the bottom level. Thus, the entire perimeter of the bottle is worked out.

4. When the design dries, we install a cartridge through the neck of the bottle. It turned out a beautiful chandelier, in appearance resembling fish scales. The product can be left in its original form or painted in any suitable color.

Making a ceiling lamp for a chandelier

The second way to make a chandelier involves the use of such materials:

• plastic bottle 2 l;
• cotton threads;
• glue.

We cut off the lower part of the bottle, approximately 3 cm. On the rest of the bottle, horizontally and carefully, from top to bottom, we wind a thread soaked in glue. As a result, we get a beautiful and stylish ceiling that can be used separately. You can connect such parts and several pieces.

On video: chandelier from a bottle and plastic spoons.

Beads as a basis

The work of creating this type of chandelier is quite difficult and requires special care and consistency.

To create a product, you need to prepare:

• beads or beads;
• basket frame;
• kapron threads;
• wire.

Manufacturing technique:

1. First of all, you need to make a blank in the form of a ring of wire.

2. The workpiece must be attached with wire to the frame.

4. After drying, a cartridge is threaded and the chandelier is suspended for convenient operation.

5. Beads or beads are threaded through the thread from the basket to the ring. The decoration itself, that is, the number of beads and threads, can be anything, based on personal preferences. In the same way, the entire basket is decorated around the perimeter.

The process of making a chandelier from beads

Before decorating the chandelier, you must first install the cartridge. Also, for convenience, you can hang the structure on a hook, which will greatly facilitate the work.

The chandelier can be hung on a hook

On video: chandelier made of handmade beads.

Wooden construction

This is a very beautiful way to decorate the kitchen, in addition, the use of natural material will only benefit.

You need to prepare the following materials:

• strips for door lining, 30-45 cm - 12 pcs.;
• glass jars, 1 liter for shades - 6 pcs.;
• paints (white and wood colors);
• self-tapping screws;
• sandpaper;
• winding machine.

The work consists of the following steps:

1. Using sandpaper, we achieve absolute smoothness of the planks.

3. The tree is painted in wood color.

4. From the boards you need to build a regular hexagon and fix the structure with self-tapping screws.

5. The cartridge is fixed to the hole in the cover.

6. We paint the jars in white or any other color, then roll them up with light bulbs inside. A beautiful and stylish chandelier is ready.

On video: unusual ideas for a wooden chandelier.

From wooden sticks

A country-style chandelier will decorate any kitchen. To create an original ceiling you will need:

• barbecue sticks;
• organza ribbon;
• glue.

The basis of the design are sticks, which are laid out around the perimeter of the square and fastened with glue. The work is quite painstaking. You also need to make sure that the sticks lie flat for the symmetry of the future chandelier. The upper part is sealed with cut sticks so that they do not protrude. Don't forget to leave room for the ceiling.

After complete drying, we proceed to decorate the product. The protruding edges of the sticks are decorated with colorful organza ribbons. At the last stage, the ceiling is hung on a hook and a cartridge is fixed in it through the hole left.

On video: an option for making a chandelier from sticks.

From disks

In order to make such an original lamp, it must be properly assembled. Materials used:

• round boards of different thicknesses - 2-4 pieces;
• racks made of wood or metal;
• disks;
• magnetic start;
• bulb.

The planks should be slightly larger in diameter than the discs. In the largest board, you need to drill a hole into which a magnetic start with a switch is installed, after which it is connected to a lamp. Discs are strung on the lamp in the right amount, on which the height of the chandelier will depend. Racks are mounted around the disks and the upper part of our structure is fixed.

1. First you need to remove your old cover and wash it thoroughly.

2. We clean the surface with sandpaper and cover with a primer.

3. Glue is diluted in the right proportion with water. The resulting mixture is gently smeared with a napkin with an image, after which it is applied to the ceiling.

4. With the help of a piece of fabric, you need to slowly smooth out the pattern, removing air and other flaws.

5. At the final stage, we use varnish to fix the result.

On video: ceiling decor using decoupage technique.

For those who want to add a little creativity to the interior of the kitchen, designers offer a lot of bold and successful solutions. The chandelier can be made from an old meat grinder, into which a cord is threaded, from a grater, collected spoons, muffin tins, as well as old pots, in which holes are made with a drill. Such products look very bold and elegant, decorate the interior and focus on important details.

If desired, by adding a little imagination, the structure can be built from almost any material and in any style. Such a creative made with your own hands will delight and bring warmth and homeliness to the general atmosphere.

Taking on the arrangement of the interior space, it is important to think through every little thing. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers say, and the interiors clearly prove that the right choice of a chandelier can not only decorate the interior of a room, but also make life brighter and more fun. Beautiful chandelier shades with an original design give a special grace and gloss to the lamps. About how to make them with your own hands and what materials it is better to use for this, you can find in this article. A detailed, step-by-step master class, as well as a visual photo, will be a great help to you in this exciting process.

Material selection

In the manufacture of a chandelier, it is difficult to single out any one material that would meet all the requirements. Each of them has its own individual characteristics and features. For example, paper, which is the most simple and affordable material, lends itself well to transformation.

Lamps made of glass fragments and strips of metal have a dazzling brilliance and a beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lace lampshades are distinguished by their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart in time and turn on your imagination.

A paper napkin chandelier is a bold enough but justified experiment.

We will describe in detail in this article how in an ordinary object you can see its creative potential for creating an exclusive decor element.

Step-by-step instructions, with a description of each action, will help you make improvised, incredibly beautiful and unique lamps that will be a great addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many are interested in how to properly make a chandelier in, and other rooms. After all, I want this element of the interior to be not only beautiful, but also functional.

On the one hand, a chandelier is a lighting fixture that can provide the proper level of lighting in an apartment. After all, a lot depends on the choice of light in the room, including the safety of the eyes. On the other hand, I want the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, the first thing to consider is the height of the ceiling. For example, a chandelier with a bar mount is suitable for low ones. So, the ceiling will look visually higher. If the ceilings are high - 3 m and above, then it is better to make your choice in favor of a pendant lamp with a hook mount.

Lamp selection

For any room you need to individually approach the intensity of its lighting.

For a small bathroom, 80-100 watts will be required.
Kitchens need a lamp power of at least 120-150 watts.
The living room and the hall cannot do without light bulbs in the range of 150-300 watts.

The number and power of lamps is calculated based on established standards - 20 watts are required per 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Edison designer lamps - look beautiful and unusual

Plafond design

The appearance, decor and design of the ceiling occupies an important place in the design of the chandelier. It is selected for the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will fit perfectly into country or chalet style, fabric and silk will perfectly suit Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step master class on making

To make a beautiful ceiling decoration, it is not necessary to start everything from scratch. Take a look around, you probably have something in your house that you have not used for a long time. And who knows, maybe it will become the main subject in the manufacture of the original lamp. Moreover, there are more than enough ideas and inspiration for creativity on the Internet.

Important! It is best to start searching for the necessary things from the kitchen or balcony. It is there that we store all sorts of rubbish that was once so necessary for us and which, as often happens, is so difficult to part with later.

Spectacular chandelier from mugs

No matter how strange it may sound, it is from dishes and other kitchen utensils that the most unusual and interesting models of lamps are obtained. For example, tea mugs are an ideal material for making a spectacular lamp.

For work we need:

• Mugs
• Saucers
• Drill
• Porcelain drill with special hole

Mastering quickly and easily

1. At the bottom of the mug, with a drill, we make a small hole for the wire, fasten the electric chuck and bring the wire out. It is desirable to seal the hole with a gypsum mixture.
2. Next, the mug must be glued to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see, original and fashionable design can be obtained from completely ordinary items.

Fascinating yarn chandelier

Since this is a fairly simple product, for its manufacture we need a minimum of things, namely:

• Wire with a section of 4-5 mm.
• wire cutters
• Fine thread
• colorful yarn

Manufacturing instructions:

1. A ring is made of wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, it can be wound on some object that has a cylindrical shape.
2. We bite off the excess wire with wire cutters, leaving 2-3 cm in reserve on each side. We tie the ends with a thin thread.
3. It remains to decorate our chandelier beautifully and brightly. To do this, we cut the threads of yarn in such a way that the length of each segment is twice the height of the ceiling.
4. Alternately, on a knot, we tie the resulting threads until we hang the whole ring with them. From the same yarn, we make a hook mount.

You can use such a lampshade both in the form of a chandelier and as a decorative element that adorns the interior of the room.

By combining the skills of macrame and papier-mâché, you can get a stylish chandelier for the bedroom

Important! To make such a lamp, instead of woolen yarn, you can use any other thread. The main thing is that it harmoniously fits your interior.

Unusual teapot lamp

You will learn how to make a chandelier from an ordinary teapot yourself from this master class. Here's what we need for this man-made masterpiece:

• Kettle
• The wire
• Electrochuck
• metal chain

Step by step guide to making

1. First of all, the bottom of the teapot is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise you can get hurt on it.
2. Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
3. A chain is attached to the handle of the kettle, through the links of which a wire is threaded. The lamp is ready.

Breathe new life into bottles

Glass bottles, especially if they have beautiful shapes, can be used to make a wonderful chandelier. Required material:

• thin rope
• Flammable liquid (alcohol or gasoline)
• Glass bottles (preferably colored)
• Edison lamps (having a beautiful spiral)
• Wire and electric socket

Do it yourself

1. We wind the rope on the bottom of the bottle, after wetting it in a flammable liquid. Then we set fire to it and let it break, and we begin to slowly rotate the bottle around its axis until the rope burns to the end. After that, we lower the bottle into a container with cold water, wrap it with a towel and, with a little effort, break off the bottom.
2. So that the cut edge is not sharp, it must be sanded. To do this, it will be enough to twist the bottle in sand or small gravel for a couple of minutes.
3. It remains to properly mount the electric cartridge, stick the wire through the neck, screw in the light bulb. From the remaining bottles, the rest of the shades are made in a similar way.

This chandelier will perfectly fit into the interior made in any, especially if you hang it over the bar counter.

Can decor

No less beautiful are lamps made from cans. They are made in the same way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, as clear glass is usually used for shades.

We need:

• Beautiful thick-walled jars (preferably with a relief pattern)
• Hammer and nails
• Wire, electric chuck
• Paint can
• Edison lamp

How to do it right

1. To begin with, using a nail and a hammer, holes are stuffed in a circle in the lid, after which the inside is gently squeezed out. The diameter of the circle must match the diameter of the socket in the chuck.
2. We insert the cartridge into the cover, mount the wire.
3. Next, paint the lid along with the cartridge in the color we have chosen. Metallic paint with a golden tint will look best.
4. It remains to screw the light bulb, close the lid and install the lamp in its place.

We all know what a globe is, but not everyone knows what amazing things can be done from it. For example - a nice lampshade for a chandelier that will perfectly fit into the interior of a children's room.

Here is everything we need:

• the globe
• Bulb
• Electric chuck with holding element

Step by step master class

1. Usually the design of the globe is not solid, so in order for us to get the desired element, we need to divide it into equal two parts (hemispheres).
2. Next, at the top of the hemisphere, you need to make a hole for the cartridge. For this, it is best to use a drill with a crown.
3. The electric chuck is put into place and securely fixed by the retaining element. Congratulations, your chandelier is ready!

Suspended antler structure

Making a unique lighting device from deer antlers is quite simple, the main thing is to have the necessary material at hand.

Such designs are famous for their special sophisticated look and are best suited for rooms with high. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have various shapes, and only natural material is used for their manufacture.

We will need:

• Antler
• Rope
• Copper wire
• Electric chuck and wire
• Bulb

Make a chandelier like this

1. Observing the precautionary rules, according to the diagram, we connect the wire to the electric cartridge.
2. Next, the wire must be beautifully wrapped with a decorative rope. For better fixation, you can use a universal transparent glue.
3. With the help of copper wire, horns are attached to the lower part of the resulting rope, placing them 2 cm above the cartridge.
4. We repeat a similar procedure with the rest of the shades, then combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

We hope that the useful tips and photos presented in the article will help you not only make beautiful ceiling lamps for chandeliers with your own hands, but also save the family budget.

Every woman wants to bring originality and comfort to her home. One of the most important elements of decor - a chandelier, can transform any interior, and created with your own hands, will give it an atmosphere of home warmth and comfort. In this article we will tell you how to create a chandelier at home, original ideas with photos and videos to help beginners.

Materials for creating a chandelier with your own hands

As materials for the manufacture of a chandelier, almost any material at hand is suitable:

• paper, gift wrapping and cardboard;
• textiles and knitwear;
• ropes, ribbons and threads;
• wood and glass;
• wire, feathers and beads.

As a frame, you can use an old chandelier or buy suitable rings and stands in stores that sell materials and tools for manual creativity.

Advice! It is very important to choose the right color scheme for materials for the future chandelier. Lampshades made of light and transparent materials are suitable for a dark room, while denser materials can be used for a light one. Using materials in yellow, orange and red shades will give the room warmth, while blue and green materials will make the room feel colder.

Option 1 - Shabby chic chandelier

An original chandelier is easy to make from an ordinary metal paper basket.

Materials used:

• metal basket for papers;
• spray paint in delicate or pastel shades: pink, peach, beige, cream, lilac, mint, jade;
• a strip of linen textile in a contrasting or matching color;
• glue gun;
• scissors;
• bulb holder.

Performance:

1. Drill a hole in the bottom of the basket for the electrical wire.
2. Use spray paint to paint the basket inside and out.
3. Then pass the electrical wire with the cartridge at the end into the hole.
4. Lay a strip of fabric 8 cm wide in folds, and then secure with a glue gun around the top of the lampshade from the basket.
5. Decorate the textile border with a bow and fabric roses.

Advice! If desired, the border can be decorated with beads, decorative glass pebbles, shells.

Option 2 - DIY art deco chandelier

For a living room or bedroom, you can make a simple and spectacular chandelier from silk fringe in the form of a cascade.

Materials used:

• 2 wooden hoops of different diameters
• white silk braid with long thick fringe
• white acrylic paint
• fishing line
• glue gun
• scissors
• socket with light bulb

Performance:

1. Paint the hoops.
2. Cut 3 identical pieces of fishing line about 50 cm long each, then use them to attach the smaller hoop to the larger one in 3 places, so that the distance between them is 5 cm less than the length of the fringe. The remaining ends of the fishing line will then be used to attach the chandelier to the electric cord.
3. Using a glue gun, glue the fringed silk braid first around the perimeter of the smaller hoop, and then around the perimeter of the larger one. Do not apply hot glue directly from the gun to the line attachment points, as this may melt the line. It is better to first apply a little glue to the paper, and then, after cooling, carefully glue the attachment points of the fishing line.
4. Fasten the chandelier to the power cord with a cartridge using the free ends of the fishing line.

Advice! The upper edge of the chandelier can be decorated with pearl or transparent beads using a glue gun. Instead of white fringe, you can use silver. If the fringe is not thick enough, it can be laid along the hoops in 2 layers. A cascading chandelier will look very interesting if the fringe is attached to a wooden base in the shape of a square.

Option 3 - DIY chandelier in country style

Using the frame of an old lampshade, you can make a beautiful chandelier by simply covering it with lace or guipure.

Materials used:

• metal frame from a lampshade of arbitrary shape;
• a strip of lace, guipure;
• threads to match the fabric, a needle;
• cord;
• scissors;
• bulb holder.

Performance:

1. Measure the circumference of the lampshade at its widest point.
2. Cut off a rectangle with a length of 4-5 cm more than the circumference of the lampshade and a width of 8-10 cm more than the height of the lampshade.
3. Connect the part into a ring, stitching along the short ends.
4. Pull the part onto the frame.
5. Hem, bending, the bottom edge.
6. Gather the free upper edge of the new lampshade, neatly distributing the folds and securing them with a cord.
7. Attach the lampshade to the power cord with a cartridge.

Advice! If necessary, the frame can be refreshed by painting from an aerosol can in a suitable shade. Instead of a lace fabric, you can use openwork knitwear or tight knitwear in light colors with stripes or with a pattern of braids, bumps.

Option 4 - DIY Tiffany style chandelier

American designer Louis Tiffany used stained glass technology to make his modernist lamps. With the help of simple materials and tools, you can independently make an exclusive Tiffany-style chandelier.

Tiffany-style lamp from a plastic bottle

Materials used:

• 5 liter plastic bottle;
• sealant;
• silver or gold paint;
• paint on glass 5-7 matching shades;
• marker;
• scissors;
• bulb holder.

Performance:

1. Cut a plastic bottle in half. To create a chandelier lampshade, use the top of the bottle along with the neck.
2. Using a marker, mark the surface of the plastic lampshade into 6 equal segments, drawing vertical lines from the neck to the bottom edge.
3. Each segment is symmetrically painted in Art Nouveau style: you can depict flowers, leaves, grapes, dragonflies, drops, taking any image of the Tiffany lamp as a basis.
4. Cut the bottom edge of the bottle along the contour of the pattern applied to the surface.
5. Draw the entire surface of the lampshade, including the lower edge, along the contour of the pattern with sealant, making sure that the lines are neat and not thick. Give him time to dry.
6. Gently, using a thin brush or ear stick, cover the surface of the contours applied with sealant with silver or gold paint.
7. Fill in the voids of the picture with paint on glass, arbitrarily combining color shades.
8. Carefully cut off the neck of the bottle.
9. Insert power cord with cartridge.

To make chandeliers with your own hands, turning on your imagination, you can use any materials, creating unique lamps in different styles. For safety reasons, use energy-saving light bulbs for their operation.

DIY thread chandelier - video

DIY chandeliers - photo

Decorating the house on your own is a favorite pastime of many hostesses, this article reveals how to make a lamp with your own hands. You can revive the interior of a living room, bedroom or hallway with the help of improvised means, only by changing the ceiling of a chandelier, floor lamp or table lamp. Do-it-yourself lampshades for lamps can be used not only in a residential interior, but also in the halls of cafes, pubs, pizzerias.

The choice of materials and lamps for the lamp

Products made for children's rooms should be made from natural non-toxic materials and painted with ecological paints.

When manufacturing, fire safety should also be taken into account, so lampshades made of combustible materials made of paper, plastic, feathers or threads should only be used with lamps that have a low heating temperature.

You need to use LED or fluorescent lamps. They have a number of advantages:

• long service life;
• minimum heating of the base from the glass part;
• light has three shades: warm, cold, neutral.

In addition, such lamps are also called energy-saving, their only drawback is their high cost.

It is also desirable that the connection of the wire to the base be made by a specialist. Do not try to perform this operation yourself, as this may lead to undesirable consequences. It is more convenient to decorate an existing ceiling frame or make it from durable and not very heavy materials.

The following materials are used to create fixtures: scissors, a mounting knife, fishing line, wire, pliers, a hot gun, in some cases it can be replaced with super glue. They should be used by an adult, it is unacceptable to involve a child in gluing. Since in one case he will get a burn, and in the other he can glue his fingers or stick to the details of the future product.

What can you make a plafond from?

Many craftsmen make lamps from completely unnecessary materials:

• from plastic or glass bottles;
• newspapers, thin or colored paper;
• artificial or natural threads;
• dried branches of an unusual shape;
• disposable spoons;
• old disks.

plastic lamp

From plastic containers of different sizes, a homemade chandelier is easily obtained.

1. For the base, you need to take a bottle of 5 liters. The bottom is cut off. Then circles with a diameter of 1.5 cm are drawn on the surface. They must be cut with a mounting knife or small scissors.
2. The bottom is cut off from the bottles for decor and the entire surface is cut with scissors into strips 0.5 - 1 cm wide, then the workpiece is heated over the lit burner. Under the influence of heat, the stripes will take on a chaotic appearance.
3. Then blanks are inserted into a 5-liter container with holes, and lids are screwed on the inside. Then a wire is threaded through the large neck and a ceiling is installed. For such a ceiling, you need to use an energy-saving lamp.
4. In some interiors, you can find a fancy lamp made on the basis of an ordinary hanger or a straw hat. In general, nothing can limit the scope of the imagination of both home craftsmen and professional designers.

Plafond from glass bottles

A very interesting version of a homemade chandelier is obtained from glass bottles. They are used to decorate the halls of catering establishments. It is also a good option for a kitchen in a residential building or apartment. This can be a ceiling, consisting of one or more bottles, in which the bottom is cut off. You can do this yourself, but it is better to use the services of a workshop where glass and mirrors are cut.

How to use thread

For a lampshade made of threads or ribbons, you will need: a ready-made frame made of strong wire, threads of different colors, scissors, glue.

1. The frame consists of two rings interconnected by metal segments. It can be made independently from durable wire.
2. One color or several shades of thread is required.
3. A thread is fixed on the lower part, then it must be pulled through the upper ring, lowered down and thrown over the lower ring. It is necessary to ensure that the thread is taut and the coils fit snugly together. As soon as the thread ends, you need to attach the next segment to the lower ring.
4. Carefully cut off the rest of the threads and glue them on the back.

Spoons for the lamp

You can make a multi-tiered, colored lamp from ordinary disposable spoons.

1. It is necessary to make a wire frame, for a small round lamp you need to make three circles with a diameter of 12, 18, 26 cm. Then the circles are fastened together with a fishing line. The largest diameter will be at the top, there should be the same distance between them.
2. In spoons, you need to make a small hole with a thick needle at the top of the handle.
3. Spoons are painted with acrylic paints in three colors, for example, yellow, orange, red.
4. Assembling a homemade chandelier: the fishing line is cut into a length equal to the distance between the circles. A spoon is tied to one end of the fishing line, and the other to the frame. Yellow spoons should be tied to the lower circle of small diameter, orange to the middle one, and red to the upper one.

Lightweight and sleek shade

For a paper ceiling, paper or thin cardboard is suitable. Such a ceiling can be either rectangular or square. First you need to consider the size of the ceiling, the larger the room, the wider the design can be. In a small nursery or hallway, a ceiling with a diameter of 30 - 35 centimeters will look good.

The frame can be made of wire, it will consist of an upper and lower part, consider the manufacture of a cylinder-shaped ceiling.

1. It is necessary to make two circles of wire of the desired diameter. They are interconnected with a fishing line, the distance between the lower and upper frame is 12 - 15 cm, the hoops are fastened with a fishing line in three or four places. The larger the diameter of the base, the more connecting elements must be made.
2. On a paper blank, you can draw circles of different diameters, figures of cartoon characters. Outline drawings can be taken from the Internet and printed, then redrawn with carbon paper. A special ruler is suitable for drawing circles, or you can outline caps or buttons of different diameters. Some drawings are cut out completely with a clerical knife, some are cut along the contour.
3. The paper is tried on the base and glued with an overlap. Then glued to the wire, can also be fixed with a thin wire. To do this, first make a hole in the paper with a thick needle or awl, then thread the wire and carefully tie it to the frame. It is advisable to glue thin paper, as it is easy to ruin it.

Exclusive ceiling made of metal cans

1. Basins made of any metal are used, an interesting option will be obtained from copper or aluminum containers. An old, used basin will also work. If there is a through hole in it, it must be welded or sealed, for example, with epoxy.
2. The inner surface must be painted in a light color so that the light reflects from it as much as possible.
3. The outer surface can be painted in a dark, saturated color, in harmony with the interior.
4. A fringe about 5 centimeters long is glued to the bottom of the rim with hot glue. In the central part of the basin, it is necessary to make a hole for the wire. It can be drilled with a drill or pierced with a nail.

Such a ceiling can be decorated with a mosaic of CDs. To do this, the disks are cut with sharp scissors into small fragments, which are glued to the outer surface of the pelvis. You can glue only the bottom contour, and paint the rest. Or decorate the entire surface of the ceiling with such a mosaic. The more convex the surface, the smaller the disk fragments should be.

natural materials

The original lamp can be made from a dry branch of an unusual shape. It must be cleaned of bark and covered with stain, then, if desired, treated with transparent varnish. The branch must be attached to a hook on the ceiling with a regular fishing line. Then I wind the wire with the lamp several times onto the branch. A branch entwined with several wires looks beautiful.

You can make a lamp out of plastic hangers. Detailed in the video:

Lamps in different rooms

DIY bottle chandeliers are more suitable for the kitchen. Designs made of glass or plastic will be easy to clean from dust and wash if necessary. For the kitchen, hallway or living room, a lamp made of natural wood is suitable.

For a children's room, a ceiling made of painted plastic bottles, a floor lamp made of bright threads or a paper composition is more suitable. The latter option cannot be called durable, but this option will appeal to children. Girls will like the plafond with butterflies, plant elements, boys will like designs with cars, superheroes or bright plastic plafonds.

In some cafes, pubs, original lamps made from bottles are used to decorate the hall. It could be beer bottles. They can serve as both a lamp shade and an interesting frame for a lamp.

Ideas for homemade lamps by location

With your own hands, you can give a new look to the floor lamp. You can decorate the ceiling with fabric, threads, paper with cut-out patterns, and you also do not need to ignore the base and leg of the lamp. They can be painted with acrylics, glazed, decorated with beads. The decor of the lower part of the floor lamp should overlap with the elements in the upper part. The easiest option is to decorate the ceiling of a solid color with lace or guipure.

Decoration of lamps

The lower part of the plafond of threads can be decorated with pompoms of the same size hanging on a thread. They are glued on the inside of the frame with glue. Pompoms can hang at the same or at different heights. They can be made in one color or combined in several shades.

To decorate paper lamps, you can use lace, thick tulle, beads of different sizes. You can decorate glass jars or bottles with glass pebbles, which can be purchased at hardware stores. You can also use buttons of different sizes and colors. Small buttons can be glued even on PVA.

On New Year's holidays, it is customary to decorate the Christmas tree, but you can also decorate the shades of lamps, floor lamps. Here you can use the usual rain, do-it-yourself snowflakes, Christmas tree figurines, decorative balls and an ordinary garland. If an energy-saving lamp is installed in a wall or floor lamp, then its ceiling can be decorated with paper snowflakes.

Wall sconces are installed in living rooms, bedrooms, children's rooms. After repair, you can use old sconces only by changing their appearance. You can paint the body of the lamp in a light color, and apply bronze or silver paint on top with a hard bristle brush to create a patina effect. If the ceiling is glass, the pattern you like is applied to its surface using a glass stencil. Here you can use contour (they are used to create a stained-glass window) or spray paints.