"Black Pearl" frigate, galleon or hodgepodge (14 photos). Sailing modeling The actual dimensions of the ship black pearl

The Pirates of the Caribbean series of films has become one of the most popular masterpieces of the cinema of the new century. The incredible adventures of sea robbers will not leave anyone indifferent.

"Pirates of the Caribbean"

The idea of ​​creating a film about sea adventures came to director Gore Verbinski in the late 90s of the 20th century. This happened when he visited the attraction "Pirates of the Caribbean" in Disneyland.

It was only in 2003 that the idea of ​​a film with sea robbers, incredible adventures, and pirate treasures was brought to life.

From that moment began the era of pirates. To date, 4 films have been released. Release of the fifth part famous history appointed for 2017.

Movie highlight

The star of "Pirates of the Caribbean" is the hero of Johnny Depp - pirate captain Jack Sparrow. His ship "Black Pearl" has become a real highlight and symbol of the film. The design of the frigate was based on the pirate sailboats of the Middle Ages. The ship "Black Pearl" has become an integral part of the film's script.

All the main scenes, exciting adventures were filmed on board the sailboat. It is not surprising that the Black Pearl is considered the standard of a pirate frigate.

How to draw the "Black Pearl" (ship)

Which of the boys did not dream of feeling like a real sea robber? The image of the brave captain Jack Sparrow is invariably associated with his sailboat. Therefore, at least once everyone would like to be a pirate on a real robber frigate.

So, you can buy a New Year's carnival and apply makeup on your face. The image is ready. But a real captain needs a Black Pearl ship. It can be drawn on paper. This is easy enough to do.

Tools

So, in order to draw Jack Sparrow's Black Pearl ship on our own, we need the following items:

• Paper.
• Pencil.
• Eraser.

Progress

Before you start drawing the Black Pearl ship, you need to plan the main stages of the creative process. According to them, the main work will be carried out.

So, the drawing of the Black Pearl ship consists of the following parts:

• Masts.
• Sail.
• Ropes.
• Frame.
• Additional drawing details.

Draw the masts

"Black Pearl" is one of the most spectacular and beautiful sailboats. Drawing it on paper will be interesting for both children and adults.

We start the drawing process with the notation. To do this, put in front of you landscape sheet. Orientation - vertical. Draw 3 straight lines in the center. They should be at some distance from each other.

Draw 4 perpendicular lines on the lines of the masts. They will become the basis for the sail.

Draw a small horizontal line from the bottom edge of the left mast. She will become the prow of the ship.

Sail

The main decoration of the Black Pearl. located along the masts. Draw them as curved quadrilaterals. Thus, there will be 4 small sails on the first and second mast of the ship.

On the third vertical line, draw a triangle on top and a curved square below. These will be the sails of the last mast.

You should start drawing from the bottom edge. Extra and wrong lines can be removed with an eraser.

Ropes

So far, our sails are located on their own, separate from the main part of the ship. They need to be connected. To do this, we will depict the ropes.

We connect the very first mast with a thin line with the bow of the ship. We draw black on it. We also connect the sails with the bowsprit using thin curved lines.

On the bottom of the first and second masts, draw several ropes connecting the sails to the ship. Circle the drawn lines with a pencil, giving the image clarity.

We connect the third mast to the Black Pearl hull also with the help of a drawn vertical rope.

Vessel

We just have to draw the ship itself. You can draw with light and fuzzy movements without pressing the pencil. So our ship will be perceived as hidden by the waves.

We draw a line of water. Above and below it we denote the edges of the ship's hull. We connect the upper line with the nose of the frigate. We make the lower part hidden by waves.

Extra parts are removed with an eraser. We increase the clarity of the image by tracing the main lines with a hard pencil.

Additional details

Our drawing is almost ready. It remains to add personality to it. To do this, we present the following small parts:

• Waves.
• Horizon line.
• Clouds.
• Soaring birds.
• Sun.

On the ship itself we draw the steering wheel, guns, sides. You can portray Captain Jack Sparrow looking through binoculars.

We got an excellent pirate sailboat "Black Pearl". Any child can draw a ship with his own hands, even those who do not know the art of painting at all. It is enough to turn on your own imagination. If the drawing does not work the first time, do not be upset. After all, you can always re-depict a pirate frigate with a brave captain on board.

We make a sailboat model

In order to make the Black Pearl ship yourself, you will need the following materials:

• Styrofoam pieces of various sizes.
• Scissors.
• Glue.
• Scotch.
• Velvet or corrugated paper.
• Thin wooden sticks(you can take special long sticks for sandwiches or kebabs).
• Thick thread (you can use woolen).
• Toothpicks.
• Black beads.
• Cardboard.
• Drawing of a pirate flag.

Progress:

1. First you need to print the image of the Black Pearl ship. The drawing will serve as the main reference for work.
2. From various pieces of foam we form the main part of the ship. We glue the parts with adhesive tape.
3. Using a knife, you should align the sides and give the frigate its final shape.
4. We add small details of the base of the sailboat.
5. Using a glue stick, we apply dark-colored corrugated or velvet paper to the body.
6. Wooden skewers are used to make masts. We install 3 sticks in the middle of the base and 2 at the edges.
7. We glue the perimeter of the ship with a thick thread.
8. We attach black beads to the toothpicks, attach them to the skeleton of the frigate and pull the rope between them. Got a fence.
9. On wooden skewers we glue cut out corrugated paper sail.
10. With the help of cardboard and toothpicks we form an observation deck. Glue it to the central mast.
11. We fix the image of the pirate flag on the sails. Our frigate is ready!

So, we learned how to draw and make the "Black Pearl" on our own. Now everyone can feel like a real sea robber.

One of the most difficult stages in the construction of a ship model is rightly considered the torment with a latrine and aft gallery. The mass of parts mated in three planes at once, constant adjustments. By the way, there was a moment when I threw slats, yelled obscenities, it seemed that this stage would never end. But in order.

Latrine. Apple tree. Amazing tree. It seems hard, but it seems to be processed better than a pear. Initially almost white, under oil it becomes bright yellow. We cut the railings in pairs, immediately on both sides.

We select on the router and make shagreen with an awl.

Separate troubles with a curl.

Then come the frames. L-shaped parallelepipeds. I spent half a day with the first, twenty minutes with the last. The main thing is to come up with a manufacturing technology. First, I glued the guides on the cyacrine according to the template, then the frames themselves, otherwise nothing.

Gallery. Linden front, pear bottom.

The fun begins at the stern, where the "shelf" repeats the death of the deck.

The walls of the gallery have already been erected. The future roof is being tried on.

Windows are next. We make a parallelogram out of plastic. First, we make horizontal grooves. We glue the bars.

Then we turn the part over and make it vertical.

We grind on a grinder and try on. By the way, the roof has already been removed.

Then we insert vertical bars into the windows and finally form the frame. By the way, the plastic was thick (5 mm), it turned out that all the internal edges were perfectly visible, I had to drive the thickness to 2 mm and then polish the internal surfaces.

Windows in place. There is a shagreen on the roof.

Bad Hollywood designers have created a bunch of railings for ZH. There is no higher board and gunwale. An no. We drill with a 2 mm drill.

In breaks we make a ladder. The stairs are made from one piece. The lower "bar" is just milling.

Meanwhile, the gallery takes on a residential look. "Fildepers" slats are made with a curly cutter made from a needle file.

On the sides, instead of windows, there will be threaded plugs. They are waiting for their time.

We return to the railing. The holes are drilled with a drill and drill stand to keep it vertical.

We square the holes with a microchisel (2 mm) made from the same file, and glue the bars.

A lot of bars.

We mill the railings on the sides. First detail. The grooves are cut with a hacksaw and finished with a square file. Then the part is bent on the iron.

On the spot.

After mascara.

We continue.

We make cut-beams in one installation on a milling cutter. All that's left is sanding.

The railing is up. Ladder completed. Parts of the velvets under the riverbeds have been removed.

And delicious grilled grills. We take a piece of an apple tree. We pass with a millimeter cutter in millimeter steps across the fibers. Then with less depth along. Nuance - you have to serve in dozens, otherwise the cubes break off. You look out the window and slowly, slowly twist. For a long time.

Insert cross boards.

And we remove the excess.

We make a groove from below with a scoring cutter. All that remains is to remove and walk a little sandpaper.

Now CJ is covered with a final layer of oil and toned. Dries out. To be continued.

That's all ready for the next step. We lay the deck. I used maple slats 5mm wide, 1.5mm thick.

The stumbling block in all forums is how to blacken the joints, imitating a caulk. Options: black thread, tinted PVA, chamfering and subsequent patination, dark veneer, painting the ends, paper from photographic packaging, dyed drawing paper / tracing paper, etc. I chose calque.

Cut off a piece of tracing paper. We paint over with ink from the heart and hang to dry. Consumption came out small - about one and a half dyed A4 sheets.

Since there is no theoretical drawing of the "Black Pearl", we had to come up with the location of the beams, guided by common sense - if possible, place them along the borders of hatches and future ladders into the hold.

The average distance turned out to be 2.5 cm.

I put the center rail. Be sure to complete, so as not to overwhelm the direction.

Cut the tracing paper into "noodles",

glue on the end of the rails.

After some time, we observe the beauty increasing with each new lath laid. The first two slats around the lattice imitate a reinforced belt. Boards are as long as possible. Then he laid it in three boards. Wanted at five, but the deck is not wide enough.

By the end of the second day, the deck is covered. We scrape with a knife. The surface is leveled well, it is difficult to make holes. Unless the knife enhances the micro-roughnesses, jumping over them during wiring, therefore problem areas better to leave. Still skin everything.

To lay the remaining decks, bulkheads need to be ennobled. I attached a template, here you can see how much the feed curve I had - the consequences of the propeller and numerous corrections. Later, I built up the side with linden slats.

Bulkhead in the nose. My first pear design. I sealed the hold with molar tape.

Next, we construct the aft bulkhead. To do this, we collect a primitive conductor. We glue paper on the main plywood, on top of another plywood, repeating the death of the deck, on paper we outline the approximate location of doors and windows. The bottom two slats had to be steamed out and held in another jig.

After a while, the main part of the bulkhead is ready.

It's for the windows. We assemble gratings from 1x2 mm rails.

We soak the outer part and bend it on the window template. Then we glue it on the plexiglass and then glue the gratings.

We return to the decks. On the bow, we separately imitate the boards around the mast (they quickly wore out and then changed), we narrow the main boards from 5 to 4 mm. We make a cut along the edges.

Feed is a little more difficult. We narrow 19 rails from 5 to 2.5 mm. Could not mechanize the process. I had to tighten my hands. First with a small planer, then with a skinner. The decks have been laid.

Performed nailing on the nose.

By the way, here are the real pins:

The process looks like this. We do markup. We prepare round bars with a diameter of 0.6 mm, drill holes.

We dilute PVA with water. We dip the rod, insert it into the hole, bite off. And so 700-800 times.

Then gently skin.

How it all started:

My husband is a fan of collecting different models. And in Once again he decided to order something interesting for himself. Breaking a bunch of sites, he never found what he needed, but on the other hand, I almost immediately fell in love with the ship from Pirates of the Caribbean. I then got very fired up, and I wanted to try to collect it. Although I’m a girl, and I haven’t had such a hobby yet, I just don’t know what came over me. Perhaps the love of the film still did its job. And we decided to order it.

Ordered from this site: Click here >>>

It took about 2 weeks from the date of order, and now my package finally arrived.

The first thing I noticed was the box. She is big enough. Its size is 61.5 by 47.5 cm.

This is how it looks:

Model scale 1:72

When I opened it, I was pleasantly surprised that all the parts were neatly packed in separate bags.

The model itself is designed for painting, it is not colored. Please pay attention to this when ordering! And then many are upset that it also needs to be painted.

There are threads in the kit, but no paints and glue. Perhaps this is for the best, because usually, in such sets, the paints are sold already dried. But I still had an ambivalent feeling, because the set is not cheap, they could have put paints.

I used acrylic paints of the Nevskaya Palitra company (for those who are interested) They have an excellent covering ability, they are matte. Just what you need for a ship!

All parts of the ship are made of hard plastic. Made very high quality and neat, down to the smallest parts. There is even a texture of wood on the deck and stern. According to the seller, the details are created thanks to the most accurate 3D modeling and innovative technologies. In total, there are 895 parts in the set, and the level of complexity is: 5, the highest.

The kit also included instructions for assembling the ship:

The instructions are not bad, in principle, everything is clear, but I still had a little difficulty.

First note!:

The first photo shows a rope (water - vuling) and I still don’t understand how to knit it to the mast. This is not shown in the instructions. Fortunately, in our age there is the Internet, then it will be necessary to look.

Second note!:

The second photo, which shows how to mount the guns, says: assembly option 1 and assembly option 2. And as I understand it, you can use 2 assembly options, or one or the other. Imagine my surprise when I did not have enough parts to mount the guns. I thought for a long time what I did wrong. As a result, it turned out that it was necessary to glue guns according to option No. 1 to one stern, and to the second according to option No. 2. And it should turn out that on one side of the ship the windows with guns should be open, and on the other closed. Moreover, in all the photos the ship is drawn with open windows on both sides. And this is also not a word in the instructions. I think this is a small flaw, those who compiled this instruction.

Assembly photo:

I did not first assemble the ship completely, and then paint it. It was convenient for me to do this in stages, especially since, in this way, hard-to-reach places are easier to work out.

Third note!:

In the first photo you see the doors under the real staircase " black pearl" from the movie.

The second photo shows the door of the Black Pearl model. As you can see, they are different. Maybe it won't matter to someone, but the model is presented as an exact copy of the ship. Why then such a difference? Apparently, the developers of the ship decided not to bother, and stuck an ordinary door.

I haven't completed the ship yet. I will update my review with new comments as I go along.

(if any) and a photo.

But now I can say that:

In general, I liked the set. The detail is very good! There are, of course, flaws in the instructions and that the door is different, but there are no complaints about the quality of the model itself. The quality is top notch!